High Strength Reinforce Composite Bar Structural Materials Basalt Fiber Rebar

Basic Info

Trademark	Huazhu
Origin	China
Production Capacity	500 Ton/Year

Product Description

Product Name	Basalt reinforced polymer, Basalt fiber rebar, BFRP
Material	Basalt fiber yarn and Epoxy
Colors	Customized
Product features	Corrosion Resistance,Light weight, High strength,Non-magnetic,Customized shape
Used	Underground Diaphragm Wall,Supporting Piled,Ocean Engineering,Roads & bridges
Product specifications	Diameter: Customized Length: Customized Shape: Customized
Product parameters	Tensile strength > 800Mpa Shear strength > 150Mpa Elastic modulus > 55Gpa

USED FOR CONCRETE REINFORCEMENT INSTEAD OF METAL REINFORCEMENT

BASIS composite mesh is rods made of fiberglass or basalt plastic compound according to GOST 31938-2012 connected at the intersections with special thermoplastic material.

The mesh is designed to reinforce concrete instead of traditional metal reinforcing mesh. It has significant advantages over metal:

- 9 times lighter

- 3 times stronger at break

- 25% cheaper

- Corrosion-resistant

- Significantly speeds up the reinforcement process (no need to fix at the construction site)

- No need to put bar chair spacers forming a protective layer of concrete

- Low thermal conductivity

- Dielectricity

The connection of the composite rods to the mesh is made according to the patented technology (BASIS composite mesh construction patent No. 156998, the design of equipment for mesh production patent No. 158113). Thermoplastic material, which joins the rods together, is also a bar chair (spacer), which forms a protective layer of concrete.For different diameter of the rod, the height of the chair is different and corresponds to the standards. The mesh-forming rod is covered with quartz sand, significantly increasing the adhesion to concrete.

The construction industry is becoming aware of the existence of reinforcing bars made from fiber-reinforced plastic. Fiberglass rebar has been on the market for some time, making inroads where steel rebar doesn't work well. The first common applications have been used in corrosive environments and places where the induced fields resulting from steel reinforced concrete structures exposed to high levels of radio frequency radiations are a problem. There is now a new entry into this field, rebar made from basalt continuous filaments. Basalt rebar clearly is ready to be used as a substitute for both steel and fiberglass rebar. It is still somewhat more expensive than steel, so it is first being used where steel has disadvantages. It can quickly replace stainless steel and epoxy-coated steel on a cost basis when regulatory hurdles are cleared. As its cost comes down with production volume, it has a chance to replace steel rebar more generally.The fact that it is not corrosive gives it a great advantage over steel. It is clear that steel in a concrete construction is a rust-spalling failure waiting to happen. Eventually moisture will get to steel wherever it is and no matter how well it is protected. It will then rust, swell, and cause the concrete to fail. With basalt rebar this issue is avoided forever.

BFRP Advantages:

High Corrosion Resistance: The base materials used by the bolt are durable materials, and they are molded through the composite process. The life span is up to 100 years. They can be used as permanent support materials;High Tensile Strength: The load is approximately double that of a steel bar with the same diameter;Low Weight: The weight is only 1/4 that of a steel bar with the same diameter. Therefore, the labor intensity is greatly reduced, and the transportation cost is reduced at the same time;Anti-static: It has no electrical conductivity, and no sparks will be produced when being cut. It is particularly suitable for high gas zones;Non-flammable: It is non-flammable and has high thermal isolation;Cuttability: It avoids damages to cutter heads, and does not delay excavation;Save cost: Use this material as reinforcing bars for road and bridge, could reduce Secondary repair cost.

Company Profile

FAQ:

Q1. How soon can make delivery?
A: For stock products,will make shipments in 2-5 days after receiving deposit or receiving T/T;
for products need new production for common materials,usually make shipments in 7-10 days;
for products need special and rare materials,usually need 15-20 days to make shipment.

Q2. Can you provide the samples?
A:Samples can be provided with samples' charge and courier fee by the buyer's side.

Q3. What's your payment terms?
A: Down payments 30%TT and balance 70% TT or L/C.

Q4. How do you ship the goods and how long does it take to arrive?
A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive.
Airline and sea shipping also optional.
For mass products, ship freight is prefered.

Q5. Can you accept customize?
A: Yes. It can be customized as per the customers' request.

Q6. How to ensure the quality?
A:Mill Test Certificate is supplied with shipment.
If needed, a Third Party Inspection is acceptable such as SGS.