Carbon Fiber Steel Rebar Price Per Ton 6mm/9mm/12mm Deformed Bar Iron Bar Turkish Reinforcement Bar Cheap Tmt Steel

Product Description

STEEL REBARS

Products featureRebar is mainly used in the skeleton of reinforced concrete building components, which requires certain welding
performance,mechanical strength and bending deformation performance in use. The raw material billet of rebar steel is carbon structural steel or low alloy structural steel treated by calm melting, which mainly bears tensile stress in concrete, and the rebar steel can better bear the action of external force due to the greater bond capacity with concrete due to the action of rib.

Deformed steel bar

Surface quality. The surface quality of rebar steel is stipulated in the relevant standards, requiring that the end should be cut straight, the surface shall not have cracks, scarring and folding, and there shall be no harmful defects in use.

Allowable value of external dimension deviation. The requirements for the bending degree of rebar and the geometry of rebar are specified in the relevant standards. As stipulated in our standard, the bending degree of straight and bar reinforcement should not affect the normal use, and the total bending degree should not be greater than 0.4% of the total length of reinforcement.

Allowable value of external dimension deviation. The requirements for the bending degree of rebar and the geometry of rebar are specified in the relevant standards. As stipulated in our standard, the bending degree of straight and bar reinforcement should not affect the normal use, and the total bending degree should not be greater than 0.4% of the total length of reinforcement.

Production process introductionThe main technological process of rebar steel production is as follows: blast furnace molten iron → converter (electric furnace) →refining outside the furnace → billet continuous casting → sizing → warehousing → steel rolling furnace → bar mill → controlled rolling and cooling → cold bed → sizing shear → collection and baling → weighing → listing and warehousing, as shown in Figure 1.1. The typical production process of rebar enterprises can be roughly divided into three main areas according to the degree of close connection between various processes: iron making area, main steel refining area and finishing area.
Recommend Products Products real shot

At present, the standard of rebar implementation in China is GB1499.2-2018, which is divided into ordinary hot rolled steel bar and fine grain hot rolled steel bar. According to the standard definition, ordinary hot rolled steel bars are delivered in a hot rolled state. Its metallographic structure is mainly ferrite and pearlite, and no other structure affecting its performance is allowed. Fine grain hot rolled steel bar refers to the fine grain steel bar formed by controlled rolling and controlled cooling process in the hot rolling process. The metallographic structure is mainly ferrite and pearlite, and no other microstructure affecting the service performance is allowed. The grain size is not thicker than 9 grade.

The main uses of deformed steel bar
Rebar is a small type of steel, mainly used for the skeleton of reinforced concrete building components. Rebar is usually used in reinforced concrete, the effect of its stripes is to increase the friction force, make rebar and concrete bite together, form one,under the action of external force will not produce twitching phenomenon, improve the strength of concrete. Rebar is widely used in building, bridge, road and other civil engineering construction. Large to highways, railways, Bridges, culverts, tunnels,flood control, DAMS and other public facilities, small to the foundation of housing construction, beams, columns, walls, boards

FAQ
Q:How can i contact you?
A:We have 24 hours customer service, patience to solve any problem for you,Click on 'Chat Now' or send your message to contact us!
Q: Can I send samples?
A: Of course, we can send samples all over the world. Our samples are free, but the customers have to pay for the express
delivery
Q: What ports of shipment do the goods depart from?
A: we ship from Shanghai, Tianjin, Qingdao, Ningbo ports.
Q: How long is your lead time?
A: Generally speaking, our delivery time is within 15-45 days.
Q: About the price?
A: Prices vary from period to period due to cyclical changes in raw material prices. We can negotiate.
Q:Why believe us ?
A:Our principle is to put customers first and operate in good faith. If you are in trouble, we will help you. We have the most
advanced information in China's steel market, so we can offer customers a more reasonable and assured price.